Category: Completed tasks

We were contacted by the owner of a 2010 Mercedes-Benz Sprinter 906 after losing the last working key to the vehicle. The customer requested two complete replacement keys, including remote radio functionality and buttons for locking and unlocking the vehicle. The entire job was completed on the same day. We first gained safe access to the vehicle without […]

A customer contacted us with a 2015 Volkswagen Tiguan equipped with a faulty MED17.5.2 engine control unit (ECU). Instead of purchasing a brand-new ECU, the customer found a suitable used replacement module at a local junk yard. The used ECU needed to be properly programmed and adapted to the vehicle. We completed the procedure using ODIS Service with online […]

Another second key added to a 2015 Ford Escape. We cut the new key blade, prepared the key, and programmed it to the vehicle. The new key was tested to make sure it worked correctly. If you need a second key or additional keys for your Ford, it is a good idea to make one before losing the original. […]

Another SRS airbag module crash data reset completed on a Subaru Forester. The vehicle was equipped with SRS module 98221SC040. We removed the module and performed the service on the bench using K-Line communication. First, we read the module data and confirmed that crash data was stored in memory. The crash data was then cleared, and the module was […]

We recently completed another SRS airbag module crash data reset on a 2019 Hyundai Ioniq. The vehicle was equipped with an SRS module with part number 95910-G2000. Using specialized diagnostic and programming equipment, we accessed the SRS module directly through the OBD portwithout removing the module from the vehicle. SRS Crash Data Reading and Reset The first step was […]

Another Subaru Airbag / SRS module crash data reset completed by our automotive electronics specialists in Surrey BC. This time, we worked with a 2020 Subaru Crosstrek equipped with SRS module 98221FL330. The customer needed the stored crash data removed from the Airbag control module after an accident. Subaru SRS Module Crash Data Reset Before performing the reset, we first […]

Another Honda SRS/Airbag module reset completed by our mobile automotive electronics specialist in Surrey BC.The customer contacted us after restoring a 2018 Honda Civic. The vehicle had previously been involved in an accident, and the SRS system had recorded crash data in the airbag control module.After the vehicle restoration, the customer needed the stored crash data removed from […]

Another Audi electronics job completed in Surrey BC. This time, we worked on a 2018 Audi A3 after an accident in which the airbag system had deployed. The customer had already repaired the vehicle and replaced the required components and safety systems. However, after the repair, two fault codes remained in the vehicle related to the seat […]

Another Audi key programming job completed by our mobile car key locksmith in Surrey BC. This time, we worked with an Audi RS5 Keyless system for a customer who wanted to add a second working key to the vehicle. Having a second key is an important backup for any modern Audi. If the original key is lost or […]

Another mobile car key locksmith job was successfully completed for a 2021 Jeep Wrangler with a Keyless system. The customer contacted us to add a second working key to the vehicle. Having a spare key is especially important when there is only one working key available. Losing the last key can turn a simple spare-key job into a […]